Browse all practice questions for the Programmable Logic Controller (PLC) Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Programmable Logic Controller (PLC) Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Which capability is commonly associated with a programming device?
  • Which statement best describes sensors?
  • Which of the following is true about the logical rack's I/O point counts?
  • In general terms, what is a Transducer?
  • What is the completion of one PLC operating cycle commonly called?
  • Which component is described as a physical hardware assembly that houses devices such as I/O modules, processor models, and power supplies?
  • Which statement best describes the PLC output interface?
  • Which step helps ensure data integrity when programming a PLC?
  • Capacitor proximity sensors are actuated by which materials?
  • How many program files does the PLC processor automatically open when a project is first created?
  • Where is the main ladder routine program file located in a newly created RSLogix project?
  • Proximity switches usually sense the presence of a target without physical contact.
  • Which statement best describes the output energize instruction (OTE)?
  • What power supply is connected to the normally open push buttons on the workstation?
  • Which component is responsible for converting between analog and digital signals within an analog I/O module?
  • When verifying a program before loading it, which action is appropriate?
  • In a ladder logic rung, where is the output located relative to the input conditions?
  • What is the memory size of the processors in the lab workstations?
  • The Allen-Bradley SLC-500 address I:2/4 refers to a
  • Program files in the processor memory are identified by file numbers in what range, and which files are automatically created?
  • Which statement best describes the PLC chassis?
  • Typically a word in a PLC is 16 bits.
  • Which statement about the Output Latch (OTL) is true?
  • What is the primary purpose of a programming device in PLC systems?
  • The Run mode is used to execute the user program. Which option best describes this function?
  • What does the datafile portion of memory store?
  • Which statement about voltage-based versus current-based sensors is true according to the material?
  • Resolution is defined as:
  • Field devices are identified by the processor by means of their addresses.
  • What term describes a method of maintaining current flow after a momentary switch has been pressed and released?
  • Which term specifies a circuit that maintains current flow after the initiating momentary switch is released?
  • Which of the following best describes when an OR operation outputs a high in digital logic?
  • What is the file extension for a RSLogix project?
  • The term that describes inputs and outputs that have only two states: on and off is:
  • One function of a PLC input interface module is to
  • What is a complete horizontal line in a ladder logic program commonly referred to as?
  • The output interface module connects to load devices such as lamps or solenoids
  • What is the main advantage of using a voltage sensing device over a current sensing device for analog inputs?
  • Discrete I/O are characterized by which statement?
  • What is an important security consideration when using a programming device?
  • In PLC terminology, an internal output does not directly control an external field device. This statement is:
  • Programmed latching circuits are retentive. If power is interrupted, the output will do what when power is returned?
  • Which device is designed to control output devices based on input signals and a user-developed program?
  • Which component is typically wired to 24 VAC in the workstation input circuit?
  • What is the advantage of choosing a current sensing device over a voltage sensing device for an analog input?
  • Field or real-world devices refer to
  • A programmed latching relay instruction is retentive. If the relay is latched and power is lost and then restored, the relay will:
  • Sensor sensitivity describes what?
  • How many program files are automatically opened by the PLC processor when a new project is created?
  • What value is stored in the memory location when there is no voltage at the terminal?
  • What device operates by sending sound waves through a target to measure the time for the pulses to bounce back?
  • Memory elements that store information in a PLC are called what?
  • A signal which can vary continuously is called...
  • Which action is commonly performed by a programming device?
  • Which statement best describes the PLC input interface?
  • A bipolar input module can accept signals that:
  • Which PLC component is directly responsible for turning field devices on or off?
  • Which phase updates the input image table to reflect the status of input devices?
  • An analog signal can have an infinite number of states.
  • Which device is activated by magnetism?
  • Which PLC component connects directly to field devices such as pilot lights, motor starters, and solenoids?
  • Which circuit is specifically designed to maintain current flow after a momentary activation to keep a circuit energized?
  • The programming device must be connected to the controller to run the program
  • Discrete I/O modules can be classified as
  • Which specification defines the number of field inputs or outputs that could be connected to a single module?
  • Current source modules are characterized by which statement?
  • An AND gate operates on the same principle as a
  • How does the processor identify the location of a specific input or output field device?
  • The XIO instruction looks like which type of contact?
  • Which statement best describes a programming device's function?
  • What is a typical limitation of a programming device in runtime operation?
  • There is no difference between a relay schematic and a ladder logic program.
  • Which term describes a wiring or programming technique used for sequencing and safety by ensuring outputs turn on or off under specified conditions?
  • Modular I/O systems consist of divided compartments into which separate models can be plugged. This design feature
  • Which description best defines sensors?
  • Which type of input is designed to handle gradually varying signals rather than just on/off?
  • Programmable logic controllers are categorized according to
  • The selector switches on our workstations are closed when the switch is turned to the right.
  • Status indicators on an output module indicate which of the following?
  • PLCs were originally designed as replacements for
  • On a rung, the OTE will energize the output only if which of the following is true?
  • How does a programming device differ from an operator console?
  • When is the XIO instruction true with respect to a physical input terminal?
  • What is a PLC?
  • The XIO instruction evaluates to true when the addressed memory bit is what value?
  • What is a PLC program?
  • What term describes the time required for one full cycle in a PLC?
  • Which statement best describes the effect of modular I/O design on flexibility?
  • The OTE instruction is functionally described as which component?
  • The location of a specific input or output field device is identified by the processor by means of its address.
  • After programming, what is a good practice?
  • The input image table file is changed to reflect the current status of input devices during the program scan phase of operation. True or False?
  • Is offline programming with a programming device possible?
  • Which statement about the PLC input interface is correct?
  • A control process that involves maintaining a desired set point and requires some feedback is called:
  • How much memory comes with the processors in the workstations in our lab?
  • The identifying number in the model number that established the modules are compatible with the Allen-Bradley SLC-500 family is 1746.
  • Which statement best describes the relationship between relay schematics and ladder logic program symbols?
  • The logical rack is an addressable unit consisting of how many input and output points?
  • In SLC-500 addressing, what do the designators I and O indicate?
  • A unipolar module can accept an input signal that varies in the positive direction only.
  • How are analog inputs and outputs addressed in the PLC?
  • Ladder logic is the standard programming language used to develop a series of instructions that direct the PLC to execute actions
  • For the AC discrete input module circuit schematic, what is the purpose of the filter section?
  • A process that demands operations to be performed in a specific order is described as a:
  • ______ Relays are used where it is necessary for the contact state to stay open or closed even if the coil is energized only momentarily.
  • A new PLC project automatically creates three program files: two inaccessible system files and the main ladder routine program file. This statement is:
  • The XIO instruction is commonly abbreviated for which phrase?
  • Standard programming language used to develop a series of instructions that direct the PLC to execute actions is
  • In PLC terminology, what does the term 'address' refer to?
  • Which statement describes an electromechanical relay?
  • An analog input module converts analog signals to digital values using an A/D converter.
  • What is the correct file extension for an RSLogix project?
  • A _____ is an actuator that could be controlled by discrete output from a PLC.
  • Which PLC instruction sets an output bit to one when its input becomes true and retains its state after the input loses continuity or power?
  • What occurs during each program scan cycle?
  • Which PLC component receives signals from field devices and provides binary state to the CPU?
  • Which components make up the two fundamental memory divisions mentioned for PLC memory?
  • Which functions are performed by the PLC CPU?
  • Reed switches are activated by magnetism.
  • Which type of relay maintains its contact state after the control coil is energized only momentarily?
  • Proximity switches usually sense the presence or absence of a target by means of physical contact.
  • The PLC Run Mode of operation is selected to execute the user program. Which option corresponds to this mode?
  • The term that describes inputs and outputs that can have an infinite number of states is:
  • Which item would not be classified as a data file in PLC terminology?
  • The advantage of using current-based sensing devices is:
  • Module inserted into the wrong slot could be damaged
  • A push button input field device would most likely be used to provide the signal to an analog input module.
  • If you want to know when one or both matching bits in two different words are on you would use the logic instruction
  • What components are contained in an analog I/O module?
  • What term describes a label or number indicating where information is located in a PLC's memory?
  • For the AC discrete input module circuit schematic, what is the purpose of the optical isolator?
  • Analog modules can be either voltage sensing or current sensing.
  • Analog I/O modules can be configured to sense either voltage or current.
  • Analog data is stored in memory as a word, with addressing examples such as I:2.0 or O:2.0. What does this imply about the data type?
  • Which statement is not a function of the CPU?
  • An analog module uses A/D and D/A converters.
  • The force applied to a strain gauge causes it to bend and change its
  • Before disconnecting a programming device, which precaution is recommended?
  • ScanTime is defined as the time required for one full cycle of a PLC.
  • Current sink modules are characterized by which statement?
  • Which control process requires feedback to maintain a desired set point?
  • How can you view the contents of PLC data files in the programming software?
  • A process that requires operations to be performed without regard to the order is described as a:
  • A pushbutton input field device would most likely be used to provide the signal to a discrete input module.
  • Electrical isolation of an analog I/O module specifies how accurately an analog value can be represented digitally.
  • Which statement about normally intensified rungs on a PLC display is correct?
  • The memory space of a PLC can be divided according to which two types?
  • What is the purpose of an interlock in ladder logic?
  • The analog output signal is varied under the control of the PLC program and can be used to control what?
  • Which statement correctly pairs the term with its state characteristic?
  • What is typically the first step when programming a PLC with a programming device?
  • The advantage of using a sensor that uses voltage is:
  • Which term best describes a device that converts energy forms and is commonly used in measurement and control systems?
  • The Allen-Bradley SLC-500 address O:3/0 refers to which of the following?
  • What are the primary functions of the CPU in a PLC?
  • In a PLC system, what is a primary role of the input interface module?
  • What does an analog output module do in a PLC system?
  • In RSLogixSoftware, where can you find a visual representation of all folders in the current project?
  • One disadvantage of modular I/O is its lack of flexibility
  • Interlox is a PLC programming technique used primarily for which purpose?
  • Which statement about discrete I/O modules being bit oriented is true?
  • An unipolar input module can accept an input signal that varies in the:
  • An internal output is addressed to a bit in the B3 file rather than an address in the output image table. This statement is:
  • In order to read I/O for a project what must you do first?
  • Scan time is the time required to
  • Hardwired logic is programmable and easily changed.
  • How should multiple program versions be managed with a programming device?
  • The examine if open instruction is also known as which term?
  • A discrete input module handles digital on/off signals.
  • What kind of interface does a programming device usually use?
  • The Examine If Closed instruction requires how much memory in a program file?
  • The output interface module connects to
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy